东莞市优科印刷材料有限公司 设为首页 | 添加收藏
 
  当前位置:东莞市优科印刷材料有限公司 > 产品展示 > “全息转移UV光油”的详细信息
产品类别
纸张UV光、哑油系列 (22)
水性光、哑油系列 (9)
胶黏剂系列 (6)
特种薄膜专用光、哑油 (5)
油性光油系列 (0)
成功案例 (8)
产品展示
   【上一个】 【下一个
产品名称: 全息转移UV光油
产品型号: YK-6011
点击次数: 8623次
产品信息:
YK-6011高级转移UV光油
YK-6011 Transfer UV VARNISH
一、      产品简介
1. Introduction
YK6011在使用时,不需要上水性UV底油,一次涂布在胶印油墨上即有附着力好、光泽高、耐磨性好,气味低,白度好等优点,同时比普通转移UV油减少了一道工序,减少了水性底油使用不当引起的麻烦。该产品主要由光固化树脂,活性稀释剂等组成,经紫外线照射可迅速固化成膜。广泛应用于不同纸张,作为表面转移上光之用。图案转移效果好
本产品符合玩具安全卫生,美国ASTM F963-03,欧盟EN71,ROHS标准,已通过“SGS”重金属含量检验测试。
6011, when used, do not need the water-based base oil, a coating that is in the offset printing ink on good adhesion, high gloss, good wear resistance, low odor, and good whiteness, while transfer of UV than ordinary oil reduced a process, a water-based base oil to reduce the trouble caused by improper use. The products are mainly from the light-cured resin, reactive diluent etc., can be quickly cured by ultraviolet radiation film. Widely used in different paper, used as a polishing surface transfer.
This product meets toy safety and health, the U.S. ASTM F963-03, European EN71, ROHS standards, have passed "SGS" content of heavy metal testing.
二、技术指标:
2.technical indicators:
1.外     观:淡黄色到黄色半透明液体
2.粘     度:60±2秒(涂—4杯,25℃)
3.酸     值:<5mgKOH/g
4.耐  磨 性:优
5.附  着 力:好
6.光     泽:70-80GU(光泽计,60度角)
7.固化 能量:≥75MJ/ cm2
8.涂布   量:推荐涂布量3-5G/㎡
9.适用 油墨:适用于市售多数油墨,但使用前油墨应被预先检测;
1. Appearance: light yellow to yellow translucent liquid
2. Viscosity: 60 ± 2 seconds (T -4 cups, 25 ℃)
3. Acid value: <5mgKOH / g
4. Wear resistance: good
5. Adhesion: Good
6. Gloss: 70-80GU  (gloss meter, 60 degree angle)
7. curing energy: ≥ 75MJ / cm2
8. coated amount: Recommended coating weight 3-5G /㎡
9. for ink: For most commercial ink, but before the ink used should be pre-testing;
三、建议使用方法
3. Suggested Use
1、辊涂施工,上油量视纸张品质而定。
2、紫外光强度最好保持大于75mj/cm2进行干燥。
3、加入少量IPA或醋酸乙酯等溶剂可调整施工粘度。
4、在使用6011之前,要清洗干净油槽以及橡胶辊或陶瓷辊上的其它UV油,以免影响产品的使用性能。
1, Construction of roll coating, depending on the fuel quality of paper may be.
2, UV intensity is best to keep more than 75mj/cm2 solidify
3, adding a small IPA of anhydrous alcohol or ethyl acetate solvent such as construction of adjustable viscosity.
4, before using the 6011 to clean the tank and the rubber rollers or ceramic roller on the other UV oil, so as not to affect product performance.
四、注意事项
4. Notes
1、产品保质期为六个月,请在有效期内使用。
2、避免阳光直射,避免开口长时间暴露于强光下。
3、可使用本公司生产的K695或IPA作为机械清洁剂。
4、以上相关数据来源于实验室,实际使用时仅作参考!由于纸张、油墨以及施工工艺的不同,会有所差别,请各客户根据自己的要求先对本产品进行试验,再决定其适用性!
1, the product shelf life of six months, in the period to use.
2, avoid direct sunlight, avoid prolonged exposure to strong light openings.
3, may use the company's K695 or IPA as a mechanical cleaner.
4, the above data comes from the laboratory, the actual use for reference only! As the paper, ink, and the different construction technique will be different, please request the customer according to their own first test of the product, and then determine their suitability!
五、包装规格
5. Packing
1、黄色铁罐包装.
2、净重20公斤
1, yellow tin packaging.
2, weight 20 kg
 
版权所有©东莞市优科印刷材料有限公司   制作与维护:   后台管理       
    
唐生
肖先生